CS 737X EFIS

Customized three-layer knob (rotary)
The same function as the real aircraft
No need for any software setup
Just connect to the computer via USB

VIEW SHOP PAGE

COCKPIT SIMULATOR

It is not DIY, it is a well designed product

It is a home flight simulation equipment which the closest to the real aircraft.
CS 737X EFIS is not a DIY module, it is a real home flight simulation “product”.
1:1 Simulation of the real aircraft’s size, and an engineering plastic shell.
We are pursuing each component close to the real aircraft.
To achieve this goal, we made 6 moulds.

Product type design

 

Our design is different. We use the idea of “product” to design to simulate the real aircraft.

  • 2 customized three-layer knob with button, The same function as the real aircraft
  • 2 customized two-layer knob with button, The same function as the real aircraft

Close to the appearance

Of the real aircraft

We have made 17 moulds to achieve the appearance of the real aircraft.

  • When the display mode knob is on the PLN position, the CTR button cannot be pressed
  • Fixed orientation RST / STD / CTR / TRC button, does not turn with the bottom

Close to the feel

Of the real aircraft

Customized MINS and BARO knobs, close to the feeling of the real aircraft, it feels amazing.

  • Panels and enclosures made of moulds
  • Knobs made of moulds with the same appearance as the real aircraft
  • Silicone buttons

No need for any settings, simple and easy-to-use bridge software

Only requires a USB connection

CockpitSimulator Bridge is an easy-to-use software, all you need to do is open the software, plug in your devices, and it will automatically connect to your flight simulation game and plugin aircraft. CockpitSimulator Bridge also has a hardware test function and over-the-air device firmware update.

MORE INFO

Aircraft Addon Support List

ProSim

ProSim737
(with bridge software v2024.4.0 and later)
(requires ProSim737 version 3.00 and above)
ProSimB38M
(coming soon)
(requires ProSimB38M version 1.27 and above)

Microsoft Flight Simulator

PMDG 737 for MSFS (all variants)
(with bridge software v2022.2.0 and later)
PMDG 777 for MSFS (all variants)
(with bridge software v2024.5.0 and later)
(EFIS MINS/BARO knob INOP)

X-Plane 11

X-Plane 12

B737-800X ZIBO mod
(with bridge software v2022.2.0 and later)
Threshold LevelUp 737NG
(with bridge software v2022.2.0 and later)
IXEG 737 Classic
(coming soon)

Prepar3D (v1 to v5)

Flight Simulator X

PMDG 737NGX
(with bridge software v2022.2.0 and later)
PMDG 737NGXu
(with bridge software v2022.2.0 and later)
PMDG 747-400
(with bridge software v2022.2.0 and later)
PMDG 747-8
(with bridge software v2022.2.0 and later)
PMDG 777
(with bridge software v2022.2.0 and later)
iFly Jets – The 737NG
(coming soon)

Connection Mode

USB Mode

CS 737X EFIS only needs to be connected to a computer with a USB. If using two EFIS, please adjust the CAPT ←→ F/O switch on the rear, so that they are all in the correct position.

USB HUB mode

When you have multiple Cockpit Simulator hardware and your computer’s USB port is not enough, you can use USB-HUB. Note that your USB-HUB must be with independent power supply. Otherwise, if multiple hardwares work at the same time, the power supply will be insufficient.

HOME SIMULATOR MODE

Cockpit Simulator hardware adds daisy chain mode for the home simulator builders. These connections are simple and convenient. When the hardware is connected, only single USB is needed to communicate with the computer, and other devices is connected with daisy chain mode.

Dimensions

Front View

Mounting Holes

Side View

CS 737X EFIS

Customized three-layer knob (rotary)
The same function as the real aircraft
No need for any software setup
Just connect to the computer via USB

VIEW SHOP PAGE
dsafd